Industrial Automation
Industrial Automation United States en

Integrated safety into machine automation

Our Sysmac automation platform integrates a safety solution within our One Connection and One Software concept. One Connection is achieved through the use of Safety over EtherCAT - FSoE - protocol. The One software is achieved by using Sysmac Studio for configuration, programming and maintenance. The NX Safety System consists of safety controller and safety I/O units. Both the safety controller and safety I/O can be freely distributed in an I/O rack throughout the network when used with an NJ Machine Automation Controller on an EtherCAT network, mixing them in any combination with standard NX I/O.

Complex safety challenges are simplified with NX safety control. Learn more about achieving the highest level of productivity and flexibility without compromising safety.
  • The safety controller meets Category 4, PLe according to the EN ISO 13849-1 and SIL3 according to the IEC 61508
  • Up to 8 safety input points per unit
  • Safety Function Blocks conforming with IEC 61131-3 standard programming
  • PLCopen Function Blocks for safety Integration in one software, Sysmac Studio
This safety controller uses the same hardware used on EtherCAT networks and EtherNet/IP connectivity for monitoring of status and information
Sysmac Studio Software Full License supports EtherCAT integration and EtherNET/IP Stand-alone configuration of the NX-S modular safety I/O.
Sysmac Studio Safety License supports only EtherNET/IP Stand-alone configuration of the NX-S modular safety I/O
NX-S Series can now be used in a stand-alone configuration as a powerful, modular and easily commissioned safety controller which, due to its scalability, can be efficiently adapted to the requirements of a wide variety of safety applications. Thanks to this modular and expandable hardware, the compact safety controller grows with its task slice-by-slice – right up to the highest safety level. You can grow up to 256 I/O points in one single Safety CPU. The design of safe system solutions is thus considerably simplified
Language(s)
Title
en es fr pt
Bottle Cappers & Labelers Industry Brochure PDF - - -
NX EtherNet/IP Product Brochure PDF - - -
Shrink Wrappers and Tray Sealers Industry Brochure PDF - - -
Sysmac Automation Platform Product Brochure PDF - - -
Language(s)
Title
en es fr pt
Change NX Safety Coupler Version Technical Guide PDF - - -
Connect and program G5 servo drive to NX safety Technical Guide PDF - - -
Connect the MX2 drive to NX safety Technical Guide PDF - - -
EDM (External Device Monitoring) function block for NX Technical Guide PDF - - -
Emergency Stop for NX Safety Technical Guide PDF - - -
G9SP to NX Programming Comparison Technical Guide PDF - - -
NX Safety and G9SP Reset and Restart Programming Technical Guide PDF - - -
NX to Sysmac Studio Program Upload Technical Guide PDF - - -
Troubleshoot light curtains connected to NX-Safety I/O Technical Guide PDF - - -
Language(s)
Title
en es fr pt
NX Safety Simulation Getting Started Guide PDF - - -
NX Series EtherNet/IP Coupler Units Users Manual PDF - - -
NX-S Series Safety Control Units Users Manual PDF - - -
NX-S Series Safety Control Units Instructions Reference Manual PDF - - -
Language(s)
Title
en es fr pt
NX-S Certificate PDF - - -
Language(s)
Title
en es fr pt
NX-Series Safety Control Units, NX-SL, NX-SI, NX-SO Datasheet PDF - - -
Language(s)
Title
en es fr pt
Sysmac Catalog PDF - - -